info@irricdfs.com
+86-731-84391122

Sand media filter

Focus on water filtration solutions for 20 years

Irrigation water filter agrictrual sand filter

Flow: up to 85m3/h per unit
Filtration precision:40 mic
Working pressure:0.2-1.0Mpa
Pressure loss: ≤0.02Mpa
Control: Automatic
Contact us
Message
Follow us:
Introduction

Model selecting


The working principle

DMF automatic backwash sand filter

Using three-dimensional filtration of sand, as primary filtration to deal with organic and inorganic impurities in water. Sand filters should be selected once the contents of organic impurities in the water is over 10mg/h.

Features:

1.High flow rate with low pressure loss.

2.Modularized setting, compact, with less piping reducing the investment.

3.One or multi-parallel filtration units are available according to the requirement of irrigation project.

4.Automatic backwash


The Filtering Process

Filtering with media filters, also known as depth filtration, is done by filtering water through a thick layer of graded particles, called the filter bed. These particles can be sand, gravel or other granular materials. The filtration degree depends on the effective size of the bedding and the water velocity through the filter. 

Raw water enters from the filter inlet (1) and percolates through the filter bed (2). Suspended materials come into contact and attach to the media particles. Clean water flows through the filtration nozzles (3) and out of the filter via the outlet valve (4). 

The gradual dirt buildup in the filter bed causes an increase in the pressure differential across the filter and when it reaches its maximum design value, a cleaning process should be performed. In automatic media filter installations a pressure differential switch senses the pressure differential and when it reaches a preset value, the self cleaning process begins.  


The Cleaning Process

Cleaning is done by backwashing; pressurized water flows in reverse direction - from the nozzles upwards, causing suspension of the filter bed, thus releasing the suspended matter from the bedding. The dirt particles are then washed out of the filter through the back-flush valve. In automatic media filters installations the cleaning process is done by the system's controller. When the pressure differential switch senses that the differential pressure across the system reached a pre-set value, a signal is sent to the flushing controller and the self cleaning process begins.

Professional advice

To get the best filtration effect, improving water quality and protect irrigation systems, different types of filters should be combined according to different type of raw water.

Site Installation



Please Enter Your Information

The content with * is required, others can be optional

Dawning has been developing and producing irrigation systems for 20 years, with a production park of 20,000 square meters, and an annual output of more than 200,000 sets of irrigation equipment. The agricultural irrigation filtration program covers the world and is exported to more than 50 countries. It is one of the irrigation equipment production bases in Asia.
Copyright © 2020-2025 Changsha Dawning Environmental Protection Technology Co.,Ltd.     Design By Bontop